Application

Thin Wall Moulding as per Technical Specification

Description UNIT NP 100T NP 150T
Injection Unit
Screw Diameter MM 45 40
Injection Pressure KG/CM2 1430 2450
System Pressure BAR 160 150
Screw Stroke MM 140+10 190+15
Stroke Volume CC 220 257
Shot Weight (PS) GMS 198 230
Injection Rate GMS/SEC 180 135
Injection Time SECOND 1.0 1.7
Plasticising Cap.(PS)
**MAX.SPEED
GMS/SEC 32 35
L/D Ratio
20 26
Screw Revolution RPM 400 260
Heating Capacity KW 9.1 12.5
No. of Heating Zone
5 5
Nozzle Contact Force TONNES 2.5 3.6
Locating Ring Diameter MM 125 160
Locking Unit
Type(Integrated Cast)
VERTICAL VERTICAL
Clamping Force TONNES 100 150
Mold Opening Stroke MM 360 470
Max/Min Mold Height MM 450/160 530/200
Max. Daylight MM 810 1000
Dist. Between Tie Bar MM 410 X 410 515 X 515
Size of Mold Platen MM 615 X 615 765 X 765
Ejector Force TONNES 4.5 7.5
Ejector Stroke MM 130 130
N0. of Ejector Pin NOS 5 5
General Data
Pump Drive KW 18.5 22
Total Load KW 27.1 34.5
Oil Tank Capacity LITRE 200 275
Machine Dim. L X W X H MTR 5.2 X 1.4 X 1.9 5.7 X 1.8 X 2.2
Machine Weight TONNES 4.5 7.5