Application

PET Preforms as per Technical Specification

Description Unit PET 100 PET 150 PET 200 PET 350
Injection Unit
Screw Diameter MM 45 60 70 90
Injection Pressure BAR 1260 1270 1050 1080
System Pressure BAR 150 150 150 150
Screw Stroke+SB MM 160+10 250+10 270+10 340+10
Shot Weight (PET) GMS 310 775 1130 2350
Injection Rate GMS/SEC 200 310 452 770
Injection Time SECOND 1.8 2.0 2.5 3.5
Plasticizing Cap.(PET) **Max. Speed GMS/SEC 20 85 60 86
L/D Ratio   22:01 24:01 24:01 24:01
Screw Revolution RPM 165 240 135 160
Heating Capacity KW 9.8 17 15 25
No. of Heating Zone   5 6 7 8
Nozzle Contact Force Tonnes 2.5 4.5 7 10
Locating Ring Diameter MM 125 160 160 160
Locking Unit
Type(Integrated Cast)   Vertical Vertical Vertical Vertical
Clamping Force Tonnes 100 150 200 350
Mold Opening Stroke MM 360 470 540 700
Max/Min Mold Height MM 450/160 530 / 200 600/220 750/250
Max. Daylight MM 810 1000 1140 1450
Dist. Between Tie Bar MM 410 X 410 515 X 515 570 X 570 725 X 705
Size of Mold Platen MM 615 X 615 765 X 765 840 X 840 1040 X 1020
Ejector Force Tonnes 5.8 7.5 8 15
Ejector Stroke MM 130 130 130 160
N0. of Ejector Pin Nos 5 5 9 15
General Data
Pump Drive Std - (EPHS) KW 15 22 N.A. N.A.
Pump Drive Variable Pump KW 11 18.5 N.A. N.A.
Pump Drive Servo System KW 9 22 35 55
Oil Tank Capacity Litre 200 275 315 650
Machine Dim. L X W X H Mtr 5.2 X 1.4 X 1.9 5.9 X 2.1 X 2.2 5.84 X 1.14 X 2.34 8 X 1.92 X 2.71
Machine Weight Tonnes 4.5 7.5 9 15